View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Pressure up to 6,000psi(413bar) @ 100°F(38°C)  High Temperatures up to ~ 1,200°F (~ 648℃)  Graphite packing used.  Standard 316 stainless steel  Standard non-rotation stem disc and stem packing below the threads design.  Valve stem back seating against the bevelled edge of bonnent in fully open position prevents maximum leakage through bonnet when packing fails.

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.

StructureWe will guide you through the structure of each product.

Item Component Material / ASTM Specification 1 Bar Handle SS316 2 Set screw Grade B8 TYPE 304/A193 3 Packing Bolt SS316 4 Cap nut SS316 5 Bonnet * SS316 6 Gland SS316 7 Packing * Graphite 8 Packing supports Reinfoced PTFE 9 Stem Hard Chrome-plated SS316 10 Globe disc TYPE630/A564 11 Panel nut SS316 12 Union nut SS316 13 Body * SS316

InformationWe will guide you through product details.

Technical Data

Valve Material Temperature Rating °F(°C) Pressure Rating @ -65°F to 100°F (-53°C to 38°C) SS316 -65°F ~ 100°F (-54℃ to 38℃) 6,000 psig (413 bar)

The pressure rating of valves with LOK end connections is determined by the tubing material and thickness.
The valve's pressure rating is sometimes limited by the operating pressure of the connected tubing and end connections.
Valves with standard Vee & Ball are designed for use in either fully open or fully closed positions.
All valves are factory-tested with nitrogen gas at 1000 psig (69 bar).
The maximum allowable seat leakage is 0.1 SCCM.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Working pressure up to 5,000psig (344bar) at 100°F (38℃).  Temperature rating from -65°F(54℃ ) to 450°F (232℃) with Standard PTFE packing.  Reliable Lok Tube Fitting Ends NPT&ISO Male&Female.  Metal to metal Vee & Regulating stems for elevated temperatures.  Hard Chrome plated stem threads assures extended service life.  allows panel installation. allows external adjustments of packing

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

StructureWe will guide you through the structure of each product.

Item Component Material / ASTM Specification Stainless Steel 316 Brass Alloy 400 1 Body SS316/A182 Brass/B283 - 2 Vee Stem SS316/A276 Alloy R-405 3 Panel Nut SS316/A276 Brass/B16 SS316/A276 4 Packing Ring SS316/A276 Alloy R-405/B164 5 Inner Packing Standard : PTFE, Optional : PEEK 6 Out Packing 7 Packing Gland SS316/A276 Alloy R-405/B164 8 Packing Nut SS316/A276 Brass/B16 Alloy R-405/B164 9 Handle SS316/A276 10 Set Screw SS304/A276

InformationWe will guide you through product details.

Pressure-Temperature Ratings ASME Material Group TABLE 2-2.2 N/A TABLE 2-3.4 ASME Class Rating 2080 N/A 1500 Meterial Name 316SS Brass Monel Alloy 400 Temperature, °F (°C) Working Pressure, psig (bar) -65°F (-54°C) to 100 (38) 5000 (344) 3000 (206) 3000 (206) 200 (93) 4295 (295) 2350 (161) 2640 (181) 300 (148) 3875 (266) 2050 (141) 2470 (170) 350 (176) 3710 (255) 1470 (101) 2430 (167) 400 (204) 3560 (245) 390 (26) 2390 (164) 450 (232) 3435 (236) - 2380 (163)

Panel Mounting

Divide 1. Loosen the handle set screw using an allen key and remove the handle. 2. Remove the packing nut & panel nut and set aside for later use. 3. Place the valve bonnet in the panel hole.  Reassembly 4. Tighten the panel nut on to the valve bonnet. keep the panel nut always on the external portion of the panel. 5. Finger tighten the packing nut on to the valve body 6. Place the handle on the stem. Align the set screw with the groove on the side of the stem. Tighten the set screw. 7. Fully close the valve and retract the stem two or three turns before torque the packing nut to the torque valve below.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Needle valve with integral bonnet.  Max Pressure : 5,000psig (344bar).  Features : Temperatures up to 315℃ (600°F).  Stainless Steel 316 Material Body.  Suitable for install on the instrument panel or without panels.  Round handle shown, bar handle available.  Packing nut allows external packing adjustment to ensure leak-free packing on stem.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

StructureWe will guide you through the structure of each product.

Component Material Material Grade / ASTM Specification 316SS Copper Steel Alloy 1 Bar Handle 316SS/A276 - Handle Pin, Set screw S17400/A564 2 Packing nut 316SS/A276 360/B16 12L14/A108 R405/B164 3 Cap 304SS/A240, A167 4 Filling Spring S17700/A693 5 Filling Cap 316SS/A240, A276, B783 6 Filling PTFE 7 Bottom Cap 316SS/A240 400/B127 8 Regulating stem Chrome-plated 316SS/A276 316SS/A276 R405/B164 9 Vee stem 10 Soft-seat stem Stem tip PCTFE/D1430 11 Body 316SS/A182 377/B283 11L17/A108 400/B564

InformationWe will guide you through product details.

Pressure-Temperature Ratings  200°F (93°C) max with soft-seat stem with PCTFE stem tip.  250°F (121°C) max with UHMWPE packing.  450°F (232°C) max with PFA packing.  600°F (315°C) max with PEEK packing. ASME Grade 2080 N/A 1500 Meterial Grade 2.2 N/A 3.4 Meterial Name 316SS Copper Steel Alloy 400 Temperature, °F (°C) Working Pressure, psig (bar) -65 (-53) ~ -20 (-28) -20 (-28) ~ 100 (-37) 200 (93) 250 (121) 300 (148) 5000 (344) 5000 (344) 4295 (295) 4085 (281) 3875 (266) 3000 (206) 3000 (206) 2350 (161) 2200 (151) 2050 (141) - 3000 (206) 2730 (188) 2695 (185) 2660 (183) 3000 (206) 3000 (206) 2640 (181) 2555 (176) 2470 (170) 350 (176) 400 (204) 450 (232) 500 (260) 600 (315) 3715 (255) 3560 (245) 3435 (236) 3310 (228) 3130 (215) 1470 (101 390 (26) - - - 2615 (180) - - - - 2430 (167) 2390 (164) 2380 (163) 2375 (163) - Testing / Flow Data at 100°F (37°C)  Every integral-bonnet needle valve is factory tested with nitrogen at 1,000psig (69 bar)  Seats have a maximum allowable leak rate of 0.1 std cm3/min.  Shell testing is performed to a requirement of no detectable leakage with a liquid leak detector.

Panel Mounting

Divide 1. Loosen the handle set screw using an allen key and remove the handle. 2. Remove the packing nut & panel nut and set aside for later use. 3. Place the valve bonnet in the panel hole.  Reassembly 4. Tighten the panel nut on to the valve bonnet. keep the panel nut always on the external portion of the panel. 5. Finger tighten the packing nut on to the valve body 6. Place the handle on the stem. Align the set screw with the groove on the side of the stem. Tighten the set screw. 7. Fully close the valve and retract the stem two or three turns before torque the packing nut to the torque valve below.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Needle valve with integral bonnet.  Max Pressure : 5,000psig (345bar) @ 100°F (38℃).  Features : Temperatures up to 315℃ (600°F).  Stainless Steel 316 Material Body.  Suitable for install on the instrument panel or without panels.  Round handle shown, bar handle available.  Packing nut allows external packing adjustment to ensure leak-free packing on stem.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

StructureWe will guide you through the structure of each product.

Component Material Material Grade / ASTM Specification 316SS Copper Steel Alloy 1 Bar Handle 316SS/A276 - Handle Pin, Set screw S17400/A564 2 Round handle Phenolic with brass insert Set screw Nickel cadmium-plated steel 3 Packing nut 316SS/A276 360/B16 12L14/A108 R405/B164 4 Cap 304SS/A240, A167 5 Filling Spring S17700/A693 6 Filling Cap 316SS/A240, A276, B783 7 Filling PTFE 8 Bottom Cap 316SS/A240 400/B127 9 Panel nut 316SS 360/B16 316SS 10 Regulating stem Chrome-plated 316SS/A276 316SS/A276 R405/B164 11 Vee stem 12 Soft-seat stem Stem tip PCTFE/D1430 13 Body 316SS/A182 377/B283 11L17/A108 400/B564

InformationWe will guide you through product details.

Pressure-Temperature Ratings

200°F (93°C) max with soft-seat stem with PCTFE stem tip.  250°F (121°C) max with UHMWPE packing.  450°F (232°C) max with PFA packing.  600°F (315°C) max with PEEK packing.

ASME Grade 2080 N/A 1500 Meterial Grade 2.2 N/A 3.4 Meterial Name 316SS Copper Steel Alloy 400 Temperature, °F (°C) Working Pressure, psig (bar) -65 (-53) ~ -20 (-28) -20 (-28) ~ 100 (-37) 200 (93) 250 (121) 300 (148) 5000 (344) 5000 (344) 4295 (295) 4085 (281) 3875 (266) 3000 (206) 3000 (206) 2350 (161) 2200 (151) 2050 (141) - 3000 (206) 2730 (188) 2695 (185) 2660 (183) 3000 (206) 3000 (206) 2640 (181) 2555 (176) 2470 (170) 350 (176) 400 (204) 450 (232) 500 (260) 600 (315) 3715 (255) 3560 (245) 3435 (236) 3310 (228) 3130 (215) 1470 (101 390 (26) - - - 2615 (180) - - - - 2430 (167) 2390 (164) 2380 (163) 2375 (163) -

Testing / Flow Data at 100°F (37°C)

Every integral-bonnet needle valve is factory tested with nitrogen at 1,000psig (69 bar)  Seats have a maximum allowable leak rate of 0.1 std cm3/min.  Shell testing is performed to a requirement of no detectable leakage with a liquid leak detector.

Panel Mounting

Divide 1. Loosen the handle set screw using an allen key and remove the handle. 2. Remove the packing nut & panel nut and set aside for later use. 3. Place the valve bonnet in the panel hole.  Reassembly 4. Tighten the panel nut on to the valve bonnet. keep the panel nut always on the external portion of the panel. 5. Finger tighten the packing nut on to the valve body 6. Place the handle on the stem. Align the set screw with the groove on the side of the stem. Tighten the set screw. 7. Fully close the valve and retract the stem two or three turns before torque the packing nut to the torque valve below.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Double ferrule design.  Designed based on ANSI B31.1, 31.3 standard.  Available to use for low temp to high temp.  Fitting components provide exceptional dimensional, metallurgical, and mechanical uniformity that allow predictable, repeatable installation.  Meet NPT (National pipe thread) threads standard.  Possible to measure consistent with the first installation.  Used ASTM A479 Stainless steel 316 for straight type of fittings.  Used ASTM A182 forged Stainless steel 316 for elbow, tee and cross type of fittings.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

InformationWe will guide you through the ferrule structure information.

The two ferrules separate sealing and tube gripping functions : each ferrule is optimized for its function.  The front ferrule creates a seal : against the fitting body, on the tubing outside diameter.  As the nut is turned, the back ferrule : axially advances the front ferrule, radially applies an effective tube grip.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Double ferrule design.  Designed based on ANSI B31.1, 31.3 standard.  Available to use for low temp to high temp.  Fitting components provide exceptional dimensional, metallurgical, and mechanical uniformity that allow predictable, repeatable installation.  Meet NPT (National pipe thread) threads standard.  Possible to measure consistent with the first installation.  Used ASTM A479 Stainless steel 316 for straight type of fittings.  Used ASTM A182 forged Stainless steel 316 for elbow, tee and cross type of fittings.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

InformationWe will guide you through the ferrule structure information.

The two ferrules separate sealing and tube gripping functions : each ferrule is optimized for its function.  The front ferrule creates a seal : against the fitting body, on the tubing outside diameter.  As the nut is turned, the back ferrule : axially advances the front ferrule, radially applies an effective tube grip.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Double ferrule design.  Designed based on ANSI B31.1, 31.3 standard.  Available to use for low temp to high temp.  Fitting components provide exceptional dimensional, metallurgical, and mechanical uniformity that allow predictable, repeatable installation.  Meet NPT (National pipe thread) threads standard.  Possible to measure consistent with the first installation.  Used ASTM A479 Stainless steel 316 for straight type of fittings.  Used ASTM A182 forged Stainless steel 316 for elbow, tee and cross type of fittings.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

InformationWe will guide you through the ferrule structure information.

The two ferrules separate sealing and tube gripping functions : each ferrule is optimized for its function.  The front ferrule creates a seal : against the fitting body, on the tubing outside diameter.  As the nut is turned, the back ferrule : axially advances the front ferrule, radially applies an effective tube grip.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Tube is sold in a 6m unit.  Using stainless steel 316 material.  BA (Bright annealed) Grade.  ASTM(ASME), A269 Standards.  Applied for fluid lines which required pure enviroment with high quality surface.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Possible to insert thermocouple or dip sample tube through bore-through connector.  Double ferrule design의 NPT / PT Male connector.  Designed based on ANSI B31.1, 31.3 standard.  Available to use for low temp to high temp.  Fitting components provide exceptional dimensional, metallurgical, and mechanical uniformity that allow predictable, repeatable installation.  Meet NPT / PT threads standard.  Possible to measure consistent with the first installation.  Used ASTM A479 Stainless steel 316 for straight type of fittings.  Used ASTM A182 forged Stainless steel 316 for elbow, tee and cross type of fittings.  Technical Information : [ Tubing O.D Hardness]

StructureWe will guide you through the structure of each product.

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Double ferrule design.  Designed based on ANSI B31.1, 31.3 standard.  Available to use for low temp to high temp.  Fitting components provide exceptional dimensional, metallurgical, and mechanical uniformity that allow predictable, repeatable installation.  Meet NPT (National pipe thread) threads standard.  Possible to measure consistent with the first installation.  Used ASTM A479 Stainless steel 316 for straight type of fittings.  Used ASTM A182 forged Stainless steel 316 for elbow, tee and cross type of fittings.  Technical Information : [ Tubing O.D Hardness]

StructureWe will guide you through the structure of each product.

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Connect "ㅡ" tubing with differcen outdiamter tubing.  Double ferrule design.  Designed based on ANSI B31.1, 31.3 standard.  Available to use for low temp to high temp.  Fitting components provide exceptional dimensional, metallurgical, and mechanical uniformity that allow predictable, repeatable installation.  Meet NPT (National pipe thread) threads standard.  Possible to measure consistent with the first installation.  Used ASTM A479 Stainless steel 316 for straight type of fittings.  Used ASTM A182 forged Stainless steel 316 for elbow, tee and cross type of fittings.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

To block unused tubes.  Double ferrule design.  Designed based on ANSI B31.1, 31.3 standard.  Available to use for low temp to high temp.  Fitting components provide exceptional dimensional, metallurgical, and mechanical uniformity that allow predictable, repeatable installation.  Meet NPT (National pipe thread) threads standard.  Possible to measure consistent with the first installation.  Used ASTM A479 Stainless steel 316 for straight type of fittings.  Used ASTM A182 forged Stainless steel 316 for elbow, tee and cross type of fittings.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

plug one port which is not used.  Double ferrule design.  Designed based on ANSI B31.1, 31.3 standard.  Available to use for low temp to high temp.  Fitting components provide exceptional dimensional, metallurgical, and mechanical uniformity that allow predictable, repeatable installation.  Meet NPT (National pipe thread) threads standard.  Possible to measure consistent with the first installation.  Used ASTM A479 Stainless steel 316 for straight type of fittings.  Used ASTM A182 forged Stainless steel 316 for elbow, tee and cross type of fittings.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Connect "ㅡ" one port with NPT / PT thread.  Double ferrule design.  Designed based on ANSI B31.1, 31.3 standard.  Available to use for low temp to high temp.  Fitting components provide exceptional dimensional, metallurgical, and mechanical uniformity that allow predictable, repeatable installation.  Meet NPT (National pipe thread) threads standard.  Possible to measure consistent with the first installation.  Used ASTM A479 Stainless steel 316 for straight type of fittings.  Used ASTM A182 forged Stainless steel 316 for elbow, tee and cross type of fittings.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.

View Catalog PDF ↘View slideshare ↘

FeaturesWe will guide you through the product’s features and benefits.

Connect "ㅡ" one port with NPT / PT thread.  Double ferrule design.  Designed based on ANSI B31.1, 31.3 standard.  Available to use for low temp to high temp.  Fitting components provide exceptional dimensional, metallurgical, and mechanical uniformity that allow predictable, repeatable installation.  Meet NPT (National pipe thread) threads standard.  Possible to measure consistent with the first installation.  Used ASTM A479 Stainless steel 316 for straight type of fittings.  Used ASTM A182 forged Stainless steel 316 for elbow, tee and cross type of fittings.  Technical Information : [ Tubing O.D Hardness]

SpecificationWe will guide you through the model name, specifications, and dimensions for each product.

View Product Specifications

As all sizes are for reference, they can be changed without any notification.  Please contact us for details or send to online inquiry, we will give you respond as soon as possible.  For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.

AssemblyWe will guide you through the assembly process of fitting and tube.

1. Fully insert the tube into the fitting and against the shoulder; rotate the nut finger-tight. 2. Mark the nut at the 6 o’clock position. 3. While holding the fitting body steady, tighten the nut one and one-quarter turns to the 9 o’clock position.

ApplicationCheck out the products applied in various fields.

FLUXLOK is brand for Lok fitting of HIFLUX Co., Ltd.  Suitable for chemical, oil refining, research, oil and gas companies, this product is used for various pressures.  Has not torque transition for tubing in installation.  Can be checked and inspected easily during the first installation.