High Pressure Valves & Fittings. HIFLUX > en > Regulator https://hiflux.net/bbs/board.php?bo_table=E_product6 테스트 버전 0.2 (2004-04-26) ko ABPR (Air Operating Back Pressure Regulator) - 20000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=22 ABPR (Air Operating Back Pressure Regulator)Setting pressure can be adjusted through electronic regulator,and can be controlled remotely

View Catalog PDF ↘View SlideShare ↘
  • 공압식 BPR 20,000psi
    • Air Operating BPR(Back Pressure Regulator) 20000
    • Oprerating Air Pressure : 20000psi, 3bar
    • Setting pressure can be adjusted through electronic regulator (10,000psi 0~5bar, 20,000psi 0~3bar),and can be controlled remotely
    • Six different relief pressure ranges
    • Bubble-tight shut-off at all reseat pressures
    • High flow Cv=0.6 model optional
    • Ambient Operating & Fluid Media Temperature -55℃ ~ 100℃
    Buy Now ↘
BPR, Back pressure regulator (or Back pressure reducer regulator) it is based on a contrary concept to the regulator that is generally used. Unlike the pressure regulator which is widely used to control the pressure of the outlet, the BPR steadily maintains the inlet pressure which you need. The hiflux BPR can be used for pressure of up to 15000psi (inlet pressure) and prevents water leaks by applying the type of ceiling which is suitable for the features of the gas or liquid that is being used. Setting pressure can be adjusted through electronic regulator (10,000psi 0~5bar, 20,000psi 0~3bar), and can be controlled remotely.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. By installing the BPR, a fluid (or gas) flows from inlet to outlet. Next, I will talk about a case where the inlet pressure is maintained at 90bar (1300psi / 91kg in other unit).

① First of all, turn the BPR handle, completely open it and then operate the pressure device.
② As the BPR is completely open, the pressure is released through the outlet and the pressure isn’t filled.
③ At this time, you can see that pressure within the vessel has increased if you slowly turn the BPR handle and check the gauge.
④ If you turn the handle until the pressure is 90bar and stop, the pressure within the vessel is maintained at 90bar. Even if the pressure device continuously works, pressure surpassing 90bar is discharged through the outlet and the pressure within the vessel is maintained continuously at 90bar.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif Oprerating Air Pressure : 20000psi, 3bar
ico_dot.gif Setting pressure can be adjusted through electronic regulator (10,000psi 0~5bar, 20,000psi 0~3bar),and can be controlled remotely
ico_dot.gif Six different relief pressure ranges
ico_dot.gif Bubble-tight shut-off at all reseat pressures
ico_dot.gif High flow Cv=0.6 model optional
ico_dot.gif Ambient Operating & Fluid Media Temperature -55℃ ~ 100℃
InformationWe will inform you about product specifications.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • ABPR①
  • 10000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    10000 : 10,000psi
    20000 : 20,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 ABPR (Air Operating Back Pressure Regulator) - 10000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=21 ABPR (Air Operating Back Pressure Regulator)Setting pressure can be adjusted through electronic regulator,and can be controlled remotely

View Catalog PDF ↘View SlideShare ↘
  • Air Operating BPR 10,000psi
    • Air Operating BPR(Back Pressure Regulator) 10000
    • Oprerating Air Pressure : 10000psi, 5bar
    • Setting pressure can be adjusted through electronic regulator (10,000psi 0~5bar, 20,000psi 0~3bar),and can be controlled remotely
    • Six different relief pressure ranges
    • Bubble-tight shut-off at all reseat pressures
    • High flow Cv=0.6 model optional
    • Ambient Operating & Fluid Media Temperature -55℃ ~ 100℃
    Buy Now ↘
BPR, Back pressure regulator (or Back pressure reducer regulator) it is based on a contrary concept to the regulator that is generally used. Unlike the pressure regulator which is widely used to control the pressure of the outlet, the BPR steadily maintains the inlet pressure which you need. The hiflux BPR can be used for pressure of up to 15000psi (inlet pressure) and prevents water leaks by applying the type of ceiling which is suitable for the features of the gas or liquid that is being used. Setting pressure can be adjusted through electronic regulator (10,000psi 0~5bar, 20,000psi 0~3bar), and can be controlled remotely.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. By installing the BPR, a fluid (or gas) flows from inlet to outlet. Next, I will talk about a case where the inlet pressure is maintained at 90bar (1300psi / 91kg in other unit).

① First of all, turn the BPR handle, completely open it and then operate the pressure device.
② As the BPR is completely open, the pressure is released through the outlet and the pressure isn’t filled.
③ At this time, you can see that pressure within the vessel has increased if you slowly turn the BPR handle and check the gauge.
④ If you turn the handle until the pressure is 90bar and stop, the pressure within the vessel is maintained at 90bar. Even if the pressure device continuously works, pressure surpassing 90bar is discharged through the outlet and the pressure within the vessel is maintained continuously at 90bar.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif Oprerating Air Pressure : 10000psi, 5bar
ico_dot.gif Setting pressure can be adjusted through electronic regulator (10,000psi 0~5bar, 20,000psi 0~3bar),and can be controlled remotely
ico_dot.gif Six different relief pressure ranges
ico_dot.gif Bubble-tight shut-off at all reseat pressures
ico_dot.gif High flow Cv=0.6 model optional
ico_dot.gif Ambient Operating & Fluid Media Temperature -55℃ ~ 100℃
InformationWe will inform you about product specifications.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • ABPR①
  • 10000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    10000 : 10,000psi
    20000 : 20,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 BPR (Back Pressure Regulator) - 15000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=20 Back pressure regulatorA pressure regulator that keeps the inlet pressure constant at the desired pressure

View Catalog PDF ↘View SlideShare ↘
  • Regulator BPR(Back Pressure Regulator)
    • Regulator - BPR 15000
    • BPR Pressure : 15000psi
    • Accuract : 1% of relief pressure range
    • NACE Compatibility optional
    • Six different relief pressure ranges
    • Bubble-tight shut-off at all reseat pressures
    • High flow Cv=0.6 model optional
    • Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
    Buy Now ↘
BPR, Back pressure regulator (or Back pressure reducer regulator) it is based on a contrary concept to the regulator that is generally used. Unlike the pressure regulator which is widely used to control the pressure of the outlet, the BPR steadily maintains the inlet pressure which you need. The hiflux BPR can be used for pressure of up to 15000psi (inlet pressure) and prevents water leaks by applying the type of ceiling which is suitable for the features of the gas or liquid that is being used.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. By installing the BPR, a fluid (or gas) flows from inlet to outlet. Next, I will talk about a case where the inlet pressure is maintained at 90bar (1300psi / 91kg in other unit).

① First of all, turn the BPR handle, completely open it and then operate the pressure device.
② As the BPR is completely open, the pressure is released through the outlet and the pressure isn’t filled.
③ At this time, you can see that pressure within the vessel has increased if you slowly turn the BPR handle and check the gauge.
④ If you turn the handle until the pressure is 90bar and stop, the pressure within the vessel is maintained at 90bar. Even if the pressure device continuously works, pressure surpassing 90bar is discharged through the outlet and the pressure within the vessel is maintained continuously at 90bar.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif BPR Pressure : 15000psi
ico_dot.gif Accuract : 1% of relief pressure range
ico_dot.gif NACE Compatibility optional
ico_dot.gif Six different relief pressure ranges
ico_dot.gif Bubble-tight shut-off at all reseat pressures
ico_dot.gif High flow Cv=0.6 model optional
ico_dot.gif Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • BPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 BPR (Back Pressure Regulator) - 10000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=19 Back pressure regulatorA pressure regulator that keeps the inlet pressure constant at the desired pressure

View Catalog PDF ↘View SlideShare ↘
  • Regulator BPR(Back Pressure Regulator)
    • Regulator - BPR 10000
    • BPR Pressure : 10000psi
    • Accuract : 1% of relief pressure range
    • NACE Compatibility optional
    • Six different relief pressure ranges
    • Bubble-tight shut-off at all reseat pressures
    • High flow Cv=0.6 model optional
    • Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
    Buy Now ↘
BPR, Back pressure regulator (or Back pressure reducer regulator) it is based on a contrary concept to the regulator that is generally used. Unlike the pressure regulator which is widely used to control the pressure of the outlet, the BPR steadily maintains the inlet pressure which you need. The hiflux BPR can be used for pressure of up to 15000psi (inlet pressure) and prevents water leaks by applying the type of ceiling which is suitable for the features of the gas or liquid that is being used.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. By installing the BPR, a fluid (or gas) flows from inlet to outlet. Next, I will talk about a case where the inlet pressure is maintained at 90bar (1300psi / 91kg in other unit).

① First of all, turn the BPR handle, completely open it and then operate the pressure device.
② As the BPR is completely open, the pressure is released through the outlet and the pressure isn’t filled.
③ At this time, you can see that pressure within the vessel has increased if you slowly turn the BPR handle and check the gauge.
④ If you turn the handle until the pressure is 90bar and stop, the pressure within the vessel is maintained at 90bar. Even if the pressure device continuously works, pressure surpassing 90bar is discharged through the outlet and the pressure within the vessel is maintained continuously at 90bar.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif BPR Pressure : 10000psi
ico_dot.gif Accuract : 1% of relief pressure range
ico_dot.gif NACE Compatibility optional
ico_dot.gif Six different relief pressure ranges
ico_dot.gif Bubble-tight shut-off at all reseat pressures
ico_dot.gif High flow Cv=0.6 model optional
ico_dot.gif Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • BPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 BPR (Back Pressure Regulator) - 6000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=18 Back pressure regulatorA pressure regulator that keeps the inlet pressure constant at the desired pressure

View Catalog PDF ↘View SlideShare ↘
  • Regulator BPR(Back Pressure Regulator)
    • Regulator - BPR 6000
    • BPR Pressure : 6000psi
    • Accuract : 1% of relief pressure range
    • NACE Compatibility optional
    • Six different relief pressure ranges
    • Bubble-tight shut-off at all reseat pressures
    • High flow Cv=0.6 model optional
    • Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
    Buy Now ↘
BPR, Back pressure regulator (or Back pressure reducer regulator) it is based on a contrary concept to the regulator that is generally used. Unlike the pressure regulator which is widely used to control the pressure of the outlet, the BPR steadily maintains the inlet pressure which you need. The hiflux BPR can be used for pressure of up to 15000psi (inlet pressure) and prevents water leaks by applying the type of ceiling which is suitable for the features of the gas or liquid that is being used.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. By installing the BPR, a fluid (or gas) flows from inlet to outlet. Next, I will talk about a case where the inlet pressure is maintained at 90bar (1300psi / 91kg in other unit).

① First of all, turn the BPR handle, completely open it and then operate the pressure device.
② As the BPR is completely open, the pressure is released through the outlet and the pressure isn’t filled.
③ At this time, you can see that pressure within the vessel has increased if you slowly turn the BPR handle and check the gauge.
④ If you turn the handle until the pressure is 90bar and stop, the pressure within the vessel is maintained at 90bar. Even if the pressure device continuously works, pressure surpassing 90bar is discharged through the outlet and the pressure within the vessel is maintained continuously at 90bar.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif BPR Pressure : 6000psi
ico_dot.gif Accuract : 1% of relief pressure range
ico_dot.gif NACE Compatibility optional
ico_dot.gif Six different relief pressure ranges
ico_dot.gif Bubble-tight shut-off at all reseat pressures
ico_dot.gif High flow Cv=0.6 model optional
ico_dot.gif Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • BPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 BPR (Back Pressure Regulator) - 4000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=17 Back pressure regulatorA pressure regulator that keeps the inlet pressure constant at the desired pressure

View Catalog PDF ↘View SlideShare ↘
  • Regulator BPR(Back Pressure Regulator)
    • Regulator - BPR 4000
    • BPR Pressure : 4000psi
    • Accuract : 1% of relief pressure range
    • NACE Compatibility optional
    • Six different relief pressure ranges
    • Bubble-tight shut-off at all reseat pressures
    • High flow Cv=0.6 model optional
    • Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
    Buy Now ↘
BPR, Back pressure regulator (or Back pressure reducer regulator) it is based on a contrary concept to the regulator that is generally used. Unlike the pressure regulator which is widely used to control the pressure of the outlet, the BPR steadily maintains the inlet pressure which you need. The hiflux BPR can be used for pressure of up to 15000psi (inlet pressure) and prevents water leaks by applying the type of ceiling which is suitable for the features of the gas or liquid that is being used.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. By installing the BPR, a fluid (or gas) flows from inlet to outlet. Next, I will talk about a case where the inlet pressure is maintained at 90bar (1300psi / 91kg in other unit).

① First of all, turn the BPR handle, completely open it and then operate the pressure device.
② As the BPR is completely open, the pressure is released through the outlet and the pressure isn’t filled.
③ At this time, you can see that pressure within the vessel has increased if you slowly turn the BPR handle and check the gauge.
④ If you turn the handle until the pressure is 90bar and stop, the pressure within the vessel is maintained at 90bar. Even if the pressure device continuously works, pressure surpassing 90bar is discharged through the outlet and the pressure within the vessel is maintained continuously at 90bar.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif BPR Pressure : 4000psi
ico_dot.gif Accuract : 1% of relief pressure range
ico_dot.gif NACE Compatibility optional
ico_dot.gif Six different relief pressure ranges
ico_dot.gif Bubble-tight shut-off at all reseat pressures
ico_dot.gif High flow Cv=0.6 model optional
ico_dot.gif Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • BPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 BPR (Back Pressure Regulator) - 2000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=16 Back pressure regulatorA pressure regulator that keeps the inlet pressure constant at the desired pressure

View Catalog PDF ↘View SlideShare ↘
  • Regulator BPR(Back Pressure Regulator)
    • Regulator - BPR 2000
    • BPR Pressure : 2000psi
    • Accuract : 1% of relief pressure range
    • NACE Compatibility optional
    • Six different relief pressure ranges
    • Bubble-tight shut-off at all reseat pressures
    • High flow Cv=0.6 model optional
    • Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
    Buy Now ↘
BPR, Back pressure regulator (or Back pressure reducer regulator) it is based on a contrary concept to the regulator that is generally used. Unlike the pressure regulator which is widely used to control the pressure of the outlet, the BPR steadily maintains the inlet pressure which you need. The hiflux BPR can be used for pressure of up to 15000psi (inlet pressure) and prevents water leaks by applying the type of ceiling which is suitable for the features of the gas or liquid that is being used.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. By installing the BPR, a fluid (or gas) flows from inlet to outlet. Next, I will talk about a case where the inlet pressure is maintained at 90bar (1300psi / 91kg in other unit).

① First of all, turn the BPR handle, completely open it and then operate the pressure device.
② As the BPR is completely open, the pressure is released through the outlet and the pressure isn’t filled.
③ At this time, you can see that pressure within the vessel has increased if you slowly turn the BPR handle and check the gauge.
④ If you turn the handle until the pressure is 90bar and stop, the pressure within the vessel is maintained at 90bar. Even if the pressure device continuously works, pressure surpassing 90bar is discharged through the outlet and the pressure within the vessel is maintained continuously at 90bar.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif BPR Pressure : 2000psi
ico_dot.gif Accuract : 1% of relief pressure range
ico_dot.gif NACE Compatibility optional
ico_dot.gif Six different relief pressure ranges
ico_dot.gif Bubble-tight shut-off at all reseat pressures
ico_dot.gif High flow Cv=0.6 model optional
ico_dot.gif Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • BPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
[이 게시물은 최고관리자님에 의해 2023-04-13 15:39:10 압력조절기에서 복사 됨]
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 BPR (Back Pressure Regulator) - 800 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=15 Back pressure regulatorA pressure regulator that keeps the inlet pressure constant at the desired pressure

View Catalog PDF ↘View SlideShare ↘
  • Regulator BPR(Back Pressure Regulator)
    • Regulator - BPR 800
    • BPR Pressure : 800psi
    • Accuract : 1% of relief pressure range
    • NACE Compatibility optional
    • Six different relief pressure ranges
    • Bubble-tight shut-off at all reseat pressures
    • High flow Cv=0.6 model optional
    • Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
    Buy Now ↘
BPR, Back pressure regulator (or Back pressure reducer regulator) it is based on a contrary concept to the regulator that is generally used. Unlike the pressure regulator which is widely used to control the pressure of the outlet, the BPR steadily maintains the inlet pressure which you need. The hiflux BPR can be used for pressure of up to 15000psi (inlet pressure) and prevents water leaks by applying the type of ceiling which is suitable for the features of the gas or liquid that is being used.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. By installing the BPR, a fluid (or gas) flows from inlet to outlet. Next, I will talk about a case where the inlet pressure is maintained at 90bar (1300psi / 91kg in other unit).

① First of all, turn the BPR handle, completely open it and then operate the pressure device.
② As the BPR is completely open, the pressure is released through the outlet and the pressure isn’t filled.
③ At this time, you can see that pressure within the vessel has increased if you slowly turn the BPR handle and check the gauge.
④ If you turn the handle until the pressure is 90bar and stop, the pressure within the vessel is maintained at 90bar. Even if the pressure device continuously works, pressure surpassing 90bar is discharged through the outlet and the pressure within the vessel is maintained continuously at 90bar.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif BPR Pressure : 800psi
ico_dot.gif Accuract : 1% of relief pressure range
ico_dot.gif NACE Compatibility optional
ico_dot.gif Six different relief pressure ranges
ico_dot.gif Bubble-tight shut-off at all reseat pressures
ico_dot.gif High flow Cv=0.6 model optional
ico_dot.gif Ambient Operating & Fluid Media Temperature :-55℃ ~ 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • BPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 HPR (High Pressure Regulator) - 15000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=14 HPR (High Pressure Regulator)A pressure regulator that constantly adjusts and maintains the pressure going out to the outlet within the range of pressure coming into the inlet.

View Catalog PDF ↘View SlideShare ↘
  • Regulator HPR(High Pressure Regulator)
    • Regulator HPR 15000
    • HPR Pressure : 15000psi
    • Converts to Six different outlet pressure ranges
    • Available with captured venting
    • Numerous porting options
    • Main valve cartridge easily maintenanced
    • Unbalanced stem provides positive shut-off
    • Safety and reliability of spring-loaded piston sensor
    • NACE compatible option
    • Ambient Operating & Fluid Media Temperature : -55℃ to 100℃
    Buy Now ↘
The regulator (or Pressure reducer regulator) is a pressure control device designed to maintain pressure by controlling the pressure being released to the outlet within the range of the pressure coming into the inlet. Water leaks are prevented by applying the type of ceiling that is suitable for the characteristics of the gas or liquid. The regulator is divided into gpr for low pressure and hpr for high pressure, so you can use this product according to the pressure options you want.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. If pressure of 100bar (1450psi or 101kg in other unit) enters the regulator inlet, you can control the pressure of regulator outlet in the range you want by turning the handle of our product.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif GPR Pressure : 15000psi
ico_dot.gif Converts to Six different outlet pressure ranges
ico_dot.gif Available with captured venting
ico_dot.gif Numerous porting options
ico_dot.gif Main valve cartridge easily maintenanced
ico_dot.gif Unbalanced stem provides positive shut-off
ico_dot.gif Safety and reliability of spring-loaded piston sensor
ico_dot.gif NACE compatible option
ico_dot.gif Ambient Operating & Fluid Media Temperature : -55℃ to 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • HPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 HPR (High Pressure Regulator) - 10000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=13 HPR (High Pressure Regulator)A pressure regulator that constantly adjusts and maintains the pressure going out to the outlet within the range of pressure coming into the inlet.

View Catalog PDF ↘View SlideShare ↘
  • Regulator HPR(High Pressure Regulator)
    • Regulator HPR 10000
    • HPR Pressure : 10000psi
    • Converts to Six different outlet pressure ranges
    • Available with captured venting
    • Numerous porting options
    • Main valve cartridge easily maintenanced
    • Unbalanced stem provides positive shut-off
    • Safety and reliability of spring-loaded piston sensor
    • NACE compatible option
    • Ambient Operating & Fluid Media Temperature : -55℃ to 100℃
    Buy Now ↘
The regulator (or Pressure reducer regulator) is a pressure control device designed to maintain pressure by controlling the pressure being released to the outlet within the range of the pressure coming into the inlet. Water leaks are prevented by applying the type of ceiling that is suitable for the characteristics of the gas or liquid. The regulator is divided into gpr for low pressure and hpr for high pressure, so you can use this product according to the pressure options you want.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. If pressure of 100bar (1450psi or 101kg in other unit) enters the regulator inlet, you can control the pressure of regulator outlet in the range you want by turning the handle of our product.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif GPR Pressure : 10000psi
ico_dot.gif Converts to Six different outlet pressure ranges
ico_dot.gif Available with captured venting
ico_dot.gif Numerous porting options
ico_dot.gif Main valve cartridge easily maintenanced
ico_dot.gif Unbalanced stem provides positive shut-off
ico_dot.gif Safety and reliability of spring-loaded piston sensor
ico_dot.gif NACE compatible option
ico_dot.gif Ambient Operating & Fluid Media Temperature : -55℃ to 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • HPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 HPR (High Pressure Regulator) - 6000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=12 HPR (High Pressure Regulator)A pressure regulator that constantly adjusts and maintains the pressure going out to the outlet within the range of pressure coming into the inlet.

View Catalog PDF ↘View SlideShare ↘
  • Regulator HPR(High Pressure Regulator)
    • Regulator HPR 6000
    • HPR Pressure : 6000psi
    • Converts to Six different outlet pressure ranges
    • Available with captured venting
    • Numerous porting options
    • Main valve cartridge easily maintenanced
    • Unbalanced stem provides positive shut-off
    • Safety and reliability of spring-loaded piston sensor
    • NACE compatible option
    • Ambient Operating & Fluid Media Temperature : -55℃ to 100℃
    Buy Now ↘
The regulator (or Pressure reducer regulator) is a pressure control device designed to maintain pressure by controlling the pressure being released to the outlet within the range of the pressure coming into the inlet. Water leaks are prevented by applying the type of ceiling that is suitable for the characteristics of the gas or liquid. The regulator is divided into gpr for low pressure and hpr for high pressure, so you can use this product according to the pressure options you want.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. If pressure of 100bar (1450psi or 101kg in other unit) enters the regulator inlet, you can control the pressure of regulator outlet in the range you want by turning the handle of our product.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif GPR Pressure : 6000psi
ico_dot.gif Converts to Six different outlet pressure ranges
ico_dot.gif Available with captured venting
ico_dot.gif Numerous porting options
ico_dot.gif Main valve cartridge easily maintenanced
ico_dot.gif Unbalanced stem provides positive shut-off
ico_dot.gif Safety and reliability of spring-loaded piston sensor
ico_dot.gif NACE compatible option
ico_dot.gif Ambient Operating & Fluid Media Temperature : -55℃ to 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • HPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 HPR (High Pressure Regulator) - 4000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=11 HPR (High Pressure Regulator)A pressure regulator that constantly adjusts and maintains the pressure going out to the outlet within the range of pressure coming into the inlet.

View Catalog PDF ↘View SlideShare ↘
  • Regulator HPR(High Pressure Regulator)
    • Regulator HPR 4000
    • HPR Pressure : 4000psi
    • Converts to Six different outlet pressure ranges
    • Available with captured venting
    • Numerous porting options
    • Main valve cartridge easily maintenanced
    • Unbalanced stem provides positive shut-off
    • Safety and reliability of spring-loaded piston sensor
    • NACE compatible option
    • Ambient Operating & Fluid Media Temperature : -55℃ to 100℃
    Buy Now ↘
The regulator (or Pressure reducer regulator) is a pressure control device designed to maintain pressure by controlling the pressure being released to the outlet within the range of the pressure coming into the inlet. Water leaks are prevented by applying the type of ceiling that is suitable for the characteristics of the gas or liquid. The regulator is divided into gpr for low pressure and hpr for high pressure, so you can use this product according to the pressure options you want.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. If pressure of 100bar (1450psi or 101kg in other unit) enters the regulator inlet, you can control the pressure of regulator outlet in the range you want by turning the handle of our product.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif GPR Pressure : 4000psi
ico_dot.gif Converts to Six different outlet pressure ranges
ico_dot.gif Available with captured venting
ico_dot.gif Numerous porting options
ico_dot.gif Main valve cartridge easily maintenanced
ico_dot.gif Unbalanced stem provides positive shut-off
ico_dot.gif Safety and reliability of spring-loaded piston sensor
ico_dot.gif NACE compatible option
ico_dot.gif Ambient Operating & Fluid Media Temperature : -55℃ to 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • HPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 HPR (High Pressure Regulator) - 2000 https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=10 HPR (High Pressure Regulator)A pressure regulator that constantly adjusts and maintains the pressure going out to the outlet within the range of pressure coming into the inlet.

View Catalog PDF ↘View SlideShare ↘
  • Regulator HPR(High Pressure Regulator)
    • Regulator HPR 2000
    • HPR Pressure : 2000psi
    • Converts to Six different outlet pressure ranges
    • Available with captured venting
    • Numerous porting options
    • Main valve cartridge easily maintenanced
    • Unbalanced stem provides positive shut-off
    • Safety and reliability of spring-loaded piston sensor
    • NACE compatible option
    • Ambient Operating & Fluid Media Temperature : -55℃ to 100℃
    Buy Now ↘
The regulator (or Pressure reducer regulator) is a pressure control device designed to maintain pressure by controlling the pressure being released to the outlet within the range of the pressure coming into the inlet. Water leaks are prevented by applying the type of ceiling that is suitable for the characteristics of the gas or liquid. The regulator is divided into gpr for low pressure and hpr for high pressure, so you can use this product according to the pressure options you want.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. If pressure of 100bar (1450psi or 101kg in other unit) enters the regulator inlet, you can control the pressure of regulator outlet in the range you want by turning the handle of our product.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif GPR Pressure : 2000psi
ico_dot.gif Converts to Six different outlet pressure ranges
ico_dot.gif Available with captured venting
ico_dot.gif Numerous porting options
ico_dot.gif Main valve cartridge easily maintenanced
ico_dot.gif Unbalanced stem provides positive shut-off
ico_dot.gif Safety and reliability of spring-loaded piston sensor
ico_dot.gif NACE compatible option
ico_dot.gif Ambient Operating & Fluid Media Temperature : -55℃ to 100℃
Technical FeaturesWe will guide you through the technical features of the product.
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
BracketWe will guide you through the product bracket.
BRPHPR_bracket1_en.jpg BRPHPR_bracket2_en.jpg
Regulator Dimensions(Φ)
A B C D E
bracket 70 98 86 8 58

ico_dot.gif Can be attached to the regulator housing.
ico_dot.gif User can adjust height to fit application.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • HPR①
  • 6000②
  • U③
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    800 : 800psi
    2000 : 2,000psi
    4000 : 4,000psi
    6000 : 6,000psi
    10000 : 10,000psi
    15000 : 15,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 GPR (General Pressure Regulator) - 3000 (Normal Type) https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=8 GPR (General Pressure Regulator)A pressure regulator that constantly adjusts and maintains the pressure going out to the outlet within the range of pressure coming into the inlet.

View Catalog PDF ↘View SlideShare ↘
  • Regulator GPR(General Pressure Regulator) (Normal Type)
    • GPR (General Pressure Regulator) - 3000 (Normal Type)
    • GPR Pressure : 3000psi
    • SS316L VAR SST Construction
    • Standard 15μin Surface finish
    • No threads through all wetted path
    • Compact & effective design provides a smooth and unobstructed flow path.
    • Repairable and changeable at site
    • Ambient Operating & Fluid Media Temperature : -40℃ ~ 100℃
    Buy Now ↘
The regulator (or Pressure reducer regulator) is a pressure control device designed to maintain pressure by controlling the pressure being released to the outlet within the range of the pressure coming into the inlet. Water leaks are prevented by applying the type of ceiling that is suitable for the characteristics of the gas or liquid. The regulator is divided into gpr for low pressure and hpr for high pressure, so you can use this product according to the pressure options you want.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. If pressure of 100bar (1450psi or 101kg in other unit) enters the regulator inlet, you can control the pressure of regulator outlet in the range you want by turning the handle of our product.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif GPR Pressure : 3000psi
ico_dot.gif SS316L VAR SST Construction
ico_dot.gif Standard 15μin Surface finish
ico_dot.gif No threads through all wetted path
ico_dot.gif Compact & effective design provides a smooth and unobstructed flow path.
ico_dot.gif Repairable and changeable at site
ico_dot.gif Ambient Operating & Fluid Media Temperature : -40℃ ~ 100℃
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • GPR①
  • 500②
  • U③
  • P④
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    500 : 500psi
    1000 : 1,000psi
    2000 : 2,000psi
    3000 : 3,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
  • ④ Body Type
    N : Normal
    P : Panel
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900 GPR (General Pressure Regulator) - 2000 (Normal Type) https://hiflux.net/bbs/board.php?bo_table=E_product6&wr_id=7 GPR (General Pressure Regulator)A pressure regulator that constantly adjusts and maintains the pressure going out to the outlet within the range of pressure coming into the inlet.

View Catalog PDF ↘View SlideShare ↘
  • Regulator GPR(General Pressure Regulator) (Normal Type)
    • GPR (General Pressure Regulator) - 2000 (Normal Type)
    • GPR Pressure : 2000psi
    • SS316L VAR SST Construction
    • Standard 15μin Surface finish
    • No threads through all wetted path
    • Compact & effective design provides a smooth and unobstructed flow path.
    • Repairable and changeable at site
    • Ambient Operating & Fluid Media Temperature : -40℃ ~ 100℃
    Buy Now ↘
The regulator (or Pressure reducer regulator) is a pressure control device designed to maintain pressure by controlling the pressure being released to the outlet within the range of the pressure coming into the inlet. Water leaks are prevented by applying the type of ceiling that is suitable for the characteristics of the gas or liquid. The regulator is divided into gpr for low pressure and hpr for high pressure, so you can use this product according to the pressure options you want.
OperationWe will guide you through how it works.
regulator


I will talk about our product by giving an example. If pressure of 100bar (1450psi or 101kg in other unit) enters the regulator inlet, you can control the pressure of regulator outlet in the range you want by turning the handle of our product.
FeaturesWe will guide you through the product’s features and benefits.
ico_dot.gif GPR Pressure : 2000psi
ico_dot.gif SS316L VAR SST Construction
ico_dot.gif Standard 15μin Surface finish
ico_dot.gif No threads through all wetted path
ico_dot.gif Compact & effective design provides a smooth and unobstructed flow path.
ico_dot.gif Repairable and changeable at site
ico_dot.gif Ambient Operating & Fluid Media Temperature : -40℃ ~ 100℃
SpecificationWe will guide you through the model name, specifications, and dimensions for each product.
View Product Specifications
ico_dot.gif As all sizes are for reference, they can be changed without any notification.
ico_dot.gif Please contact us for details or send to online inquiry, we will give you respond as soon as possible.
ico_dot.gif For the most effective fitting, it is recommended to use Fitting Accessory and Tubing of HIFLUX.
ApplicationCheck out the products applied in various fields.
ico_dot.gif High pressure fluid handling components for the chemical, petrol chemical, water-jet, research and oil and gas industries.
ico_dot.gif As our products are divied into pressures of 5500~150000psi, body type and port size you can use them according to the specifications which you want to use.
ico_dot.gif Our products generally are produced with stainless steel materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used
   Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, Inconel, Titanium, Nickel.
High-temperature and high-pressure products Chemical oil refining Water jet Oil gas industry Application to various research fields
NumberingWe will guide you through product classification and ordering options.
  • GPR①
  • 500②
  • U③
  • P④
  • ① Product Value
    BPR : Back pressure regulator
    HPR : High Pressure Regulator
    GPR : General Pressure Regulator
    ABPR : Air Operating Back Pressure Regulator
  • ② Inlet Pressure
    500 : 500psi
    1000 : 1,000psi
    2000 : 2,000psi
    3000 : 3,000psi
  • ③ O-Ring Type
    U : Urethane
    N : NBR
    V : Viton
    S : Silicone
  • ④ Body Type
    N : Normal
    P : Panel
]]> HIFLUX Thu, 13 Apr 2023 14:16:25 +0900